Skip to main content
+41 (0)61 815 30 00

回收利用


应用范例

  • 生物污泥
  • 油泥
  • 油漆污泥
  • 污水污泥
  • 溶剂回收
  • 放射性废料
  • 聚合物废料

长期以来,利斯特捏合反应器在许多工业回收过程中都取得了成功,其中回收了有价值的产品,并对废弃物进行进一步处理,使最终废物可以进行销毁或焚烧。大多数这些热处理的共同之处在于,在处理过程中,产品经历从液体到糊状再到干燥的各种状态。强大的利斯特捏合反应器可在间歇或连续工艺中处理各种产品状态和相位变化的独特能力使我们的客户能够显著降低投资和运营成本,并提高工业生产的盈利能力。

不同类型塑料的混合回收是回收行业日益增长的市场。利斯特已经开发了不同的聚合物脱挥回收溶剂的工艺,使溶剂含量低于允许的限值。

 Case Study: www.list-polymer-recycling.com

这些工艺您会感兴趣


相关资料下载

标题描述语言发表时间下载
LIST technology for the Drying of Paint Sludges with Solvent Recovery

The increase in the amounts of paint and lacquer sludges from industrial processes combined with more stringent legislation, reduction in available land-fills, escalating costs, and the increasing pressure for residues to be processed at the point of origin has created a tremendous incentive for the development of new and economic concepts and techniques for their minimisation.

English2005
Das Beste herausholen

Bei der Aufbereitung von Industrierückständen, Schlämmen und Sonderabfällen müssen nicht nur gesetzliche Vorschriften beachtet werden. Sinnvoll ist es, die Aufbereitung am Entstehungsort vorzunehmen; darüber hinaus sollte eine maximale Rückgewinnung an Wertstoffen sowie ein Minimum an unvermeidbaren Reststoffen gewährleistet sein.

Deutsch2001
Polutex – Drying of industrial sludges and distillation residues

This paper elaborates on the constraints of the drying process of industrial sludges and distillation residues, such as, closed design and product containment, processing of sticky, crusting, or fouling intermediate phases, versatility, low energy demand, and single step drying. It then presents the mechanical, thermal and processing features as well as the operating principles of specialised single-shaft, DISCOTHERM B CONTI/BATCH, and twin-shaft, ORP (Opposite-Rotating Processor) CONTI, kneadersdryers.

English1998
Cut viscous waste disposal costs

A dryer designed for pasty materials handles solvent Evaporation problems

English1996
Industrial Wastewater – when less is more

Synthetic fibers facility uses thermal evaporation Technology to recover waste solvent and minimize residues.

English1994
CAV Umweltgerechte Entsorgung

Ölschlämme sind meist ein Gemisch unterschiedlicher Rückstände und die physikalischen Eigenschaften dieser schwankt in weiten Grenzen. Daher stellt die Aufarbeitung dieser Ölschlämme hohe Anforderungen an Trockner.

Deutsch1993
Lösungsmittelrückgewinnung aus schwierigen Sonderabfällen

Knettrockneranlagen zur Lösemittelrückgewinnung und Wertstoffverwertung ermöglichen die betriebssichere und umweltfreundliche Entsorgung feststoffhaltiger, hochviskoser Rückstände am Entstehungsort.

Deutsch1993
Trocknen von Lackschlämmen

Allphasen-Knettrockner in geschlossener Bauweise sind gut geeignet, krustende oder zähe Zwischenphasen ohne Trockengutrückführung direkt zu trocknen.

Deutsch1993
Knettrockner Klärschlämme Lackschlämme

Für die Trocknung von Klär-/Lackschlamm, Destillationsrückständen und Waschlösungen sind Knettrockner besonders gut einsetzbar.

Deutsch1992